KS 100-BA special version
Overall equipment
Basic machine KS 100 including
- Pneumatically controlled pendelum unit: for constant contact pressure during the grinding process
- Hight adjustment by means of a spindle: for a quick and easy adjustment of the tube diameter
- Pneumatical belt tensioning: for constant belt tension and a quick change of the grinding belt
- BA circular grinding device: for constant feed of the tubes to be ground
3-roll roller table
Advantage:
The roller table does not need to be adjusted therefore change-over times are short when changing diameters.
Adjustment:
The diameter is adjusted by the machine and the circular grinding device only.
Available lengths: 2, 4, 5 and 6m
Description
For dry grinding of different materials. By means of the quick-changing system, it is possible to change from a hard contact disk for high removal to a soft disk for fine grinding within a very short period. It allows for the use of grinding, non-woven, and polishing belts.
A special polishing disk mounting further allows for the use of non-woven brushes and sisal disks for prepolishing with paste as well as of fabric polishing disks for glazing.
With a few steps and within a short period, the BA circular grinding device can be separated from the machine and used as a regular belt grinding machine.
| Technical data | |
|---|---|
| Motor | 3,2/4 kW |
| Belt dimensions | 75 oder 100×4.000 mm |
| Speed of travel | 2 – 5 m/min. |
| Motor | 3,2/4 kW |
| Bande size | 75 ou 100x4.000 mm |
| Passage speed | 2 - 5 m/min. |
